Breezaire -
General Info
Every Breezaire® Cooling System Features:
Adjustable Temperature ...
The ideal temperature for storing and aging wine is between 50 and 60 degrees Fahrenheit. Each Breezaire® wine cellar cooling system includes an adjustable thermostat that makes it possible for the user to precisely control the conditions in the wine cellar. When initially bringing the temperature down to the desired level and in maintaining the target temperature, the Breezaire® wine cellar cooling system produces a gentle stream of cool air - never a blast of cold air that could subject the wine to abrupt temperature changes.
Please note that where a bottle probe is available, it must be ordered separately.
Automatic Humidity Control...
Humidity must be present in the wine cellar to prevent cork and label deterioration. The gentle cooling action of the Breezaire® wine cellar cooling system maintains the relative humidity in the 50 to 75 percent range, eliminating excess moisture but never allowing the air to become dry enough to create an undesirable condition. (Additional moisture may be required in extreme dry climates.)
Vibration Free Operation...
All Breezaire® wine cellar cooling systems are engineered to be vibration free, hand assembled, and tested to ensure that they meet the most exacting standards. The elimination of vibration levels that may be undetectable to the owner results in wines that have greater clarity and brilliance.
Ultra Quiet Operation...
Breezaire wine cellar cooling systems perform their task quietly and unobtrusively to preserve the atmosphere of isolation from the outside world that makes a visit to the wine cellar a unique experience.
Attractive metal cabinet...
An attractive metal cabinet that blends in with the decor of your cellar area and can be flush mounted to any wall.
Ease Of Installation...
Breezaire's most popular wine cellar cooling systems are completely self-contained modules that are simply mounted in a wall and connected to a standard 115AC source (230V/50Hz also available as special order). No plumbing, complicated wiring or special procedures including the on-site installation of refrigerant are required, but you may want to prepare for a drain line. (Split system requires professional installation by a licensed refrigeration technician).
Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source.
TRICKY APPLICATION...
The 3000 series and larger can be adjusted to "Cold Air Up" within the wine cellar if only low mounting on the wall is available. Please note the units can not just sit on the floor as you still need access to the drain line underneath the unit. Cold air up/low mounting is not applicable to all cellar environments and not desirable since hot air rises; you are best to speak to one of our representatives prior to ordering . This option is $35, you may also need to make some grill adjustments on site.
The Breezaire units can also be flush mounted to the cellar side or partially mounted into the room, whereas most other cooling units require proper installation only.
Electrical Requirements...
All Breezaire wine cellar cooling units come 115V. 60Hz for North American power consumption.
A dedicated 15 amp circuit (units up to 4000 BTUs) or 20 amp circuit (units from 6000-8000 BTUs) is strongly recommended.
A few models are available for European electrical requirements in 230V, 50Hz. Please see the WK2150, WK3350, WKC2200 and the Split Systems. Please enquire about product price and shipping cost to your country.
Due to electronic differences Breezaire does not recommend their "E" or "L" series for electrical requirements outside the North American Standard.
If you require the cord out the back of the cooling unit, (plugging into room in adjacent warm space) please specify at time of ordering.
Quality Construction...
All Breezaire wine cellar cooling systems are:
- Designed to deliver superior performance
- Constructed using only the highest quality components.
- Hand assembled to assure that the finished product excels in all ways.
Warranty Information...
Owners enjoy the security of warranty coverage that reflects Breezaire's high standards. All parts used in the self-contained cooling units are warranted for 5 years. Factory labor is provided at no cost for 1 year. The split systems have a one year parts warranty and factory labor is provided at no charge.
If you would like racking as well, we will be happy to customize a design and obtain a shipping quote for your entire order. to go to Racking Pages.
Breezaire Wine Cellar Cooling Units are available for shipping within the United States of America (USA) and Canada.
|