Cellar Pro 2000 series of wine cellar cooling units are designed for cabinets and small spaces, and allow some greater flexibility and options than the 1800 series
Max. Cooling Capacity: up to 400 Cu. Ft.
Cellar Pro 2000 series of wine cellar cooling units are designed for cabinets and small spaces, and allow some greater flexibility and options than the 1800 series
Max. Cooling Capacity: up to 400 Cu. Ft.
The Cellar Pro 2000VSI wine cellar cooling unit is best suited for internal installations.
Interior use cellar cooler for cellars up to 400 cubic feet.
The Cellar Pro 2000VSX wine cellar cooling unit is best suited for external installations.
Exterior use cellar cooler for cellars up to 400 cubic feet.
With the bottle probe the cooling unit cycles on and off with regards to the temperature in the bottle as opposed to the temperature in the wine cellar.
Extend the distance between your cooling unit and bottle probe by up to 25 feet.
Extend the distance between your cooling unit and bottle probe by up to 50 feet.
Remote display / Control unit
Allows control panel to be in a different location than the cooling unit.
With this kit, the cooling unit's cold air intake & exhaust can be ducted up to 100 equivalent feet.
The Cellar Pro wine cooling units can now be completely ducted when the front duct kit is combined with one of the rear duct kits! Bottle Probe and Remote Display included with this option.
With this hood, the cooling unit's hot air intake & exhaust can be ducted up to 100 equivalent feet.
Our mid size wine cooling units can now be completely ducted when our front duct kit is combined with this rear duct or rear duct with fan!
This duct kit includes an 8-inch inline fan (240CFM), which increases the ducting distance from 100 to 200 equivalent feet.
Our mid size wine cooling units can now be completely ducted when our front duct kit is combined with rear duct or this rear duct with fan.
Switch the fan power to match the on/off cycle of the cooling unit.
Compatible with the Mid Size Series and the 1800XTS
Also known as Compressor Heater.
Cellar Pro's Crankcase Heater is required if the condenser (rear) of the cooling unit is exposed to temperatures below 40°F - but not lower than 20°
...already included with purchase of the outdoor hood.
Fan Cycling Switch allows for cooling units including the VS Series, 1800 Series, Splits and Air Handler Series, to operate in temperatures as low as -20°F.
Replacement filter for CellarPro integrated humidifier
Reusable aluminum air filter.
This filter upgrade is already included with the VSX series cooling unit.
Replacement Fiberglass Filters
for internal use only
Price listed is for 2 filters.
Need your cellar a bit colder for immediate serving temperature of white wine then the White Wine modification will allow the cellar to be programmed for as low as 45F
Please note, this temperature is much colder than what would normally be used for aging wine cellars.
Increases the warranty for your Cellar Pro from 2 to 5 years for your cellar refrigeration system.
Covers all parts and labor.
Must be specified at time of ordering cooling unit.
Cellar Pro is now available in 220V / 50Hz Option, for European Electrical needs.
Control your cellar pro cooling unit from phone app via select thermostat companies using the 24V wiring.