Ceiling mount Cellar Pro 3000 - 3000Scm – can be mounted adjacent to the ceiling.
The Lower profile split cooling unit is less than 7” high. This unit is surface-mounted so may be a good fit when there are no joists in the ceiling (think concrete pad above) Sometimes older homes don’t have joist pockets that are deep enough to accept the full height of other manufacturer evaporator systems in their ceiling mount splits.
- Evaporator Dimensions: 35.1"W x 18.8"D x 6.5"H
- Condenser Dimensions (without hood): 13.5"W x 18.9"D x 9.1"H
Available Cellar Pro Networkable Thermostat Upgrade.
Although the cooling units are rated for various size rooms, the thermal load may require a larger sized cooling unit. Thermal load may be affected by glass in the cellar, room positioning or other factors. Please let a Rosehill Wine Cellar rep make some suggestions for you if needed.
See Additional Information tab if present for more details
Please specify if you want the Solenoid Valve or Electronic Control for the Cellar Pro Split systems.
Solenoid Valve - typically used indoors. There is a separate controller for the evaporator and the condensor.
Electronic Control - Mandatory if the condensor will be placed in a cold environment or the condensor will be managed by the evaporator.
Condenser Operating Temperature Range: 0°F to 110°F
Certified by ETL to UL standards
Active Humidity Control
Digital Controls (LED Display)
115V AC / 60Hz
Audible and Visual Alarms
Power On/Off Switch
Inside the cellar, the evaporator unit is designed to mount on the wall near the top of the wine cellar. Outside the cellar, the condensing unit is attached to the evaporator unit by a line-set (sold separately) up to 100 equivalent feet.
ALL Cellar Pro Split systems are available with optional exterior hood which allows the condensing units to be installed in external environments, subject to the temperature range noted above. Please inquire.
Exposure to temperatures below 40°F requires the addition of our low ambient heater kit. The split systems are not shipped with the fan cycling switch required for low temperatures. On its own, the cooling unit will function in environments above 40F/4C. If your condenser will be in and environment below 40F/4C and approaching as low as -20F/ -28C you require the Low Ambient Heater kit. The kit includes both the compressor heater and the fan cycling switch.
Amps at High Fan -
CP 3000S - 6.6amps
CP 4000S - 8.9amps
CP 6000S - 13.8amps
CP 8000S - 15.4amps
NOTE: Cellar Pro's Split evaporators use the same variable speed fans and advanced controls that we use in our VS Series through-the-wall cooling units. As a result, their Split systems provide super-quiet operation, outstanding cooling power and adjustable humidity control that our competitors can't match.
CellarPro wine cellar cooling units are greatly reliable cellar coolers made in the United States of America. CellarPro LLC is situated in Cotati, CA, California, 94931 USA. Available for shipping thoughout the US and Canada.
Cellar Pro options are shipped at no charge as long as they are ordered with main Cellar Pro unit.
Yes, shipping is $1 for Cellar Pro cooling units in the lower 48 states!
Options shipped with cooling unit will be shipped with no additional delivery charge. Options shipped on their own will have shipping rate applied, please inquire.
Shipped directly from the manufacturer so you get the most up to date technology available.
CALIFORNIA RESIDENTS will also be charged applicable state tax for this product. This additional charge will not be reflected in the shopping cart but will be added on during processing once CA is chosen as the state of delivery.
NOTE: Cellar Pro options are shipped at no charge as long as they are ordered with main cellar pro unit.
IMPORTANT SHIPPING INFORMATION
US shipping cost is fixed for all of continental US. Extra charges may apply for Hawaii and Alaska.
Canadian shipping cost indicated is to major Canadian city. Extra charges may apply within Canada for smaller towns or remote locations.
UPON RECEIPT OF GOODS:
Please inspect for any damage and verify the number of boxes as compared to the waybill. Please indicate any damage, wear & tear to boxes or discrepancies while you are signing for the shipment.
Please count your boxes and inspect for damage prior to signing receipt of boxes.
IF YOU HAVE DAMAGED ITEMS:
Please report damage to us as soon as possible. Generally it is better to accept the box(es) indicating damage on the waybill as opposed to refusing the shipment.
We will ship you new replacement items immediately, at no charge, as long as you indicated on the waybill that there was damage. We insure all items we ship, however, in order to make a claim it must be started within 4 business days of shipping.
If you discover damage after the delivery person has left or you did not sign for the items received please contact us as well as contacting the shipping company right away.
Please be assured that we stand behind our products and our shipping methods. You buy with confidence when you buy from Rosehill Wine Cellars.
Do not throw away boxes/any packaging material!! Damaged product must remain in the original packaging in order to process damage claim. Please contact Rosehill ASAP at 1-888-253-6807.
Split System Owner's Manual
Water Cooled Split System Owner's Manual
Split System Spec Sheet
Split System Condensing Unit Cut Sheets
Split System Evaporator Cut Sheets
Cellar Pro Standard Warranty
Split System Check List
NOTE: Be sure to have the installing technician complete the CellarPro checklist upon installation. You will then send this to Cellar Pro to activate your warranty.