Same great Wine Guardian name, now available in a Through the Wall version! These cooling units offer many options such as remote interface, remote sensor and exhaust ducting. Each cooling unit is able to handle up to 1200 cubic feet.
Wine Guardian Through the Wall Cooling Unit
Max. Cooling Capacity: 600 cu. ft
BTU'S (max): 1100/hr
Max. Cooling Capacity: 1200 cu. ft
BTU'S (max): 2160/hr
Wall Mounted or stand alone, drip pad type wine humidifier that comes with Digital Humidistat for humidity read out.
Remote Interface Controller.
Control and monitor temperature and humidity from a remote location.
(Already included with Ducted & Split Systems)
Sense multiple locations within the wine cellar.
Up to 3 separate sensors can be installed if desired.
Exhaust Duct Collar
For exhausting hot air away from the mounting location
(warm side or outside of cellar)
Duct Collar Kit
Kit include one (1) exhaust duct collar, one 25-ft length of 6-in round flexible ductwork, two (2) tie wraps and fasteners.
The heating option is designed for when the spaces surrounding the wine cellar fall below 55°F (10°C) for a while. Should the cellar fall below set point then the heater will act to warm the air entering into the wine cellar.
Extend your warranty to:
Total (5) years on compressor
Also see details on
The serving temperature cooling option allows the temperature of the cellar to be programmed for 45 F which is considered more of serving temperature for white wine
This is a colder temperature than what most maturing wine cellars are programmed for and being a bit warmer would be more appropriate for long term storage of wine and it’s natural aging process.